NC2210 RAMP TESTER

NC2210 Ramp Tester

Description

The NC2210 is a fully optimized ramp tester for navigation and communication equipment. This unit provides test signals for marker beacon, communication, localizer, glide slope and VOR. Also included is a wide band comm receiver with agc to permit evaluation of comm transmitter AM fidelity. See the owner’s manual for detailed specifications.

The TKM NC2210 is a NAV/COMM ramp tester that has significant improvements over the NC2200, which it replaces. The improvements include the following:

  • Higher RF Power
  • Precise localizer and glide slope deflection
  • Calibrated VOR bearings at 10 degree increments
  • Crystal controlled modulation frequencies
  • Longer battery life
  • Internal antenna with adjustable length
  • Smaller size

Specifications

  • Localizer:  108.1 Mhz +/- .003% -3 +/- 3 dbm at base of antenna
    • Deviation: Centered, +/- .047 DDM, +/- .094 DDM, +/- .15 DDM
    • Tone delete: 90 and 150 Hz with undeleted tone at 30%
    • Accuracy: +/- .005 DDM
  • Glide Slope: 334.7 Mhz +/- .003% -6 +/- 3 dbm at base of antenna
    • Deviation: Centered, +/- .094 DDM, +/- .188 DDM, +/- .30 DDM
    • Tone delete: 90 and 150 Hz with undeleted tone at 4-%
    • Accuracy: +/- .01 DDM
  • ILS: Both the Localizer and Glide Slope signals are above.
    • Deviation: Both signals deviated simultaneously
  • VOR: 108.0 MHz +/- .003% -3 +/- 3 dbm at base of antenna
    • Bearing: Selectable in 10 degree increments
    • Accuracy: +/- 1.5 degree
  • Marker: 75.0 MHz +/- .003%
    • Modulation: 400, 1300, 3000, 1020 HZ @ 95% – CW or pulsed -3 +/- 3 dbm at base of antenna
  • Communication: 118.0 MHz +/- .003%
    • Modulation: 400, 1300, 3000, 1030 Hz @ 30% – CW or pulsed
    • Transmitter test: -10 to +10 dbm Go-Nogo. Phones to check modulation
  • Size: 3.8″ wide x 7.4″ height x 2.3″ depth
  • Weight: 1.3 lbs
  • Power: Internal battery with over 2 hours running time. (110 vac charger included)